98
8. Event Memory
The FA-10RU can store and recall 100 event memories. It can also control 100 event memories in
the connected FA-505.
* FA-1010 and FA-505 settings are stored in different memory banks. Therefore, FA-1010
settings cannot be loaded to FA-505 units.
8-1. LOAD EVENT MEMORY
- - - L O A D E V E N T M E M O R Y - - -
P 8 1 1
F 1 L o a d M o d e : A l l D a t a
F 2 U n i t : F A - 1 0 R U
F 3 N o : 0 N a m e : D e f a u l t
P r e s s F 4 U N I T Y t o s t a r t l o a d i n g
Parameter
Default
Setting range
Description
Load Mode
All Data
All Data
FS1-FS5 Only
(*)
Allows you to select the event loading mode.
All Data:
Loads all setting data saved in the
event.
FS1-FS5 Only:
Loads only the selected FS
event data. (*) will be the FS name set on the
FA-505.
Unit
FA-10RU
FA-10RU
FA-505
Allows you to select a unit from which to load
the event data.
No
0
0 - 100
Allows you to select an event number to be
recalled.
0:
Allows you to recall the default settings.
Name displays the event name set for each
event number.
F4 UNITY
－
－
The F4 UNITY button allows you to load the
event data specified under Load Mode, Unit,
or No.
Displays the
“Loading event memory”
message while processing.
* See section 10-5.
“Event Naming” for details on event name settings on the FA-10RU.
Events saved on the FA-505 can be named using FA-50GUI.
In event data, adjustable ranges for White Level and Black Level vary depending on FA-505
Software Version, less than 1.21 or more than 2.00. Therefore White Level and Black Level
settings will be reset if loading events that were saved in Software Version 1.21 or earlier, to an
FA-505 with Software Version 2.00 or later.
EVENT
