22
5-2. SDI GRP1 >> SDI GRP2
This example remaps asynchronous SDI embedded audio channels. Embedded audio Group 1
(CH1-4) is assigned to Group 2(CH5-8).
Audio source
SDI input audio Group 1 (CH1 to 4)
Output channels
SDI output audio Group 2 (CH5 to 8 )
Setting Required Parameters
Menu
Parameter
Channel
Setting
Description
Refer to
Input
SDI SYNC
Group1
Auto (default)
Automatically
changes the mode
to asynchronous.
Mapping
SDI MAP
CH5
SDI GRP1
Assigns SDI input
audio Group 1 to
SDI output audio
Group 2.
Output
EMB THRU
Group 2 * Embed (default)
Embeds the audio
source to Group 2.
System
SDI BYPS
---
Operate (default)
Performs audio
processing.
* For SD-SDI signals, Embed or Through should be selected for all groups.
Adjustable Parameters
Menu
Parameter
Channel
Default Setting
Description
Refer to
Input
SDI PCM
Group1
Auto
Allows you to select
PCM or nonPCM for
audio source.
SDI Gain
CH1-4
0.0dB
Allows you to adjust
input gain.
Output
SDI MODE
CH5/6
CH7/8
Stereo
Allows you to select
stereo or mono for
output audio.
SDI RESO
CH5-8
24bit
Allows you to select
bit depth for output
audio.
SDI Gain
CH5-8
0.0dB
Allows you to adjust
output gain.
System
SDI Lock
---
Auto
Allows you to select
an SDI format if set
to
Internal
.
Test SIG
---
Off
Allows you to output
the test signal if set
to
On
.
GRP 1
GRP 2
UFM-
30DEMUX
GRP 1
USO
RESTRITO