21
5. Operation Examples
5-1. AES CH1-4 >> SDI EMB CH1-4
This example embeds AES input (CH1-4) to SDI embedded audio Group 1 (CH1-4).
Audio source
AES input CH1 to 4
Channels to which audio
source is embedded
SDI output CH1 to 4 (Group 1)
Setting Required Parameters
Menu
Parameter
Channel
Setting
Description
Refer to
Mapping
SDI MAP
CH1
AES CH1
Assigns AES input
CH1-4 to SDI output
CH1-4.
CH2
AES CH2
CH3
AES CH3
CH4
AES CH4
Output
EMB THRU
Group1 *
Embed (default)
Embeds the audio
source to Group 1.
System
SDI BYPS
---
Operate (default)
Performs audio
embedding.
* For SD-SDI signals, Embed or Through should be selected for all groups.
Adjustable Parameters
Menu
Parameter
Channel
Default Setting
Description
Refer to
Input
AES SYNC
CH1-4
SRC On
Allows you to select
Sync or Async for
audio source.
AES PCM
CH1/2
CH3/4
Auto
Allows you to select
PCM or nonPCM for
audio source.
AES Gain
CH1-4
0.0dB
Allows you to adjust
input gain.
Output
SDI MODE
CH5/6
CH7/8
Stereo
Allows you to select
stereo or mono for
output audio.
SDI RESO
CH5-8
24bit
Allows you to select
bit depth for output
audio.
SDI Gain
CH5-8
0.0dB
Allows you to adjust
output gain.
System
SDI Lock
---
Auto
Allows you to select
an SDI format if set
to
Internal
.
Test SIG
---
Off
Allows you to output
the audio test signal
if set to
On
.
GRP 1
UFM-
30MUX
USO
RESTRITO
