22
5-2. SDI EMB GRP1 >> SDI EMB GRP2
This example remaps asynchronous SDI embedded audio channels. Embedded audio Group1
(CH1-4) is assigned to Group 2(CH5-8).
Audio source
SDI input CH1 to 4 (Group 1)
Channels to which audio source
is embedded
SDI output CH5 to 8 (Group 2)
Setting Required Parameters
Menu
Parameter
Channel
Setting
Description
Refer to
Input
SDI SYNC
Group1
Auto (default)
Automatically
changes mode to
asynchronous.
Mapping
SDI MAP
CH5
SDI GRP1
Assigns embedded
audio Group 1 in the
SDI input to Group 2
in the SDI output.
Output
EMB THRU
Group2 *
Embed (default)
Embeds the audio
source to Group 2.
System
SDI BYPS
---
Operate (default)
Performs audio
embedding.
* For SD-SDI signals, Embed or Through should be selected for all groups.
Adjustable Parameters
Menu
Parameter
Channel
Default Setting
Description
Refer to
Input
SDI PCM
Group1
Auto
Allows you to select
PCM or nonPCM for
audio source.
SDI Gain
CH1-4
0.0dB
Allows you to adjust
input gain.
Output
SDI MODE
CH5/6
CH7/8
Stereo
Allows you to select
stereo or mono for
output audio.
SDI RESO
CH5-8
24bit
Allows you to select
bit depth for output
audio.
SDI Gain
CH5-8
0.0dB
Allows you to adjust
output gain.
System
SDI Lock
---
Auto
Allows you to select
an SDI format if set
to
Internal
.
Test SIG
---
Off
Allows you to output
the audio test signal
if set to
On
.
GRP 1
GRP 2
UFM-
30MUX
GRP 1
USO
RESTRITO
