14
Item
Default
Selection
Description
Sync
Format
Auto
(See the
table
“Format
Settings” as
shown on
next page
below.)
Selects video format of SDI signal.
The formats listed on the table as shown on next
page can be selected.
Multiple video formats that are used need to be
selected each time a format is switched.
Auto:
Selects video format automatically.
When different signal other than the selected
video format is input, an image selected in Video
Loss Mode will be output.
AES 7/8
Port Input
AES 7/8
AES7/8
LTC
Selects signal to input in AES 7/8 port.
AES7/8:
AES CH7/8 audio signals are input.
LTC:
LTC signals are input
LTC Input
SDI
SDI
AES
Selects ANC area time code to SDI output.
SDI:
Outputs SDI input data without processing.
AES:
Inserts or overwrites LTC and VITC by LTC
data that were input into AES 7/8 Port.
Audio
Reference
Level
-20dBFS
-20dBFS
-18dBFS
Sets audio test signal output level.
-20dBFS:
Test signal will be output at -20dBFS
level.
-18dBFS:
Test signal will be output at -18dBFS
level.
Audio Test
Signal
Output
Off
Off
1kHz Tone
Outputs audio test signal when 1kHz Tone is
selected.
Off:
Selected input audio signal will be output.
1kHz Tone:
Internally generated 1kHz TEST
signal will be output.
Video Loss
Mode
Black
Black
Blue
Selects black or blue video for output if SDI is not
input, or the input video format is different from
the Sync Format setting. (See Sec. 5-4-1). Note
that these video signals are output asynchronous
with the system. In addition, no payload ID is
passed through.
Black:
Outputs black video.
Blue:
Outputs blue video.
Format Settings
3G SDI
HD SDI
SD SDI
1080/59p(Level-A)
1080/50p(Level-A)
1080/60p(Level-A)
1080/59p(Level-B)
1080/50p(Level-B)
1080/60p(Level-B)
1080/59i
1080/50i
1080/60i
1080/30p
1080/29p
1080/25p
1080/24p
1080/23p
1080/24PsF
1080/23PsF
720/59p
720/50p
720/60p
720/24p
720/23p
1035/59i
1035/60i
525/60
625/50
5-4-2. Parameter
Selection
Description
Import
Export
Import:
Selects a file by clicking the
File Selection
button and loads the
settings in GUI.
Export:
Downloads a GUI settings file.