23
8-1-2. LAN A Port
LAN A port functions via the built-in USF-105AS router in which network addresses are
translated and IP packets are passed to an appropriate application. Therefore, USF modules
that are installed into USF-105AS and respectively have IP addresses can be set in the
WebGUI and their states can be monitored through SNMP via a single port (LAN A). When
building a large scale system with multiple USF-105AS units, you can reduce the number of IP
addresses. Connect the LAN A Port via an external switching hub.
Factory settings
LAN A IP Address: 172.16.0.10
Refer to WAN (LAN A) Settings of Sec. 9-3
. “Network Tab” for details on changing network
settings.
Connection Example
8-2. PC System Requirements
WebGUI requires the following minimum PC specifications.
OS
Windows® 7 Professional (32/64-bit)
Windows® 8.1 or 10 Pro (32/64-bit)
CPU
Intel® Core
™
2 Duo processor, 2 GHz or more
Memory
2 GB or more
Display
Resolution of 1280×1024 pixels or higher recommended
Must be capable of full color (24-bit) display
Network port
Ethernet at least one port
100BASE-TX/1000BASE-T
Network cable
100BASE-TX: Category 5 or better
1000BASE-T: Category 6 or enhanced category 5
Web Browser
Windows® 7 Internet Explorer11
Windows® 8 Internet Explorer11
Windows® 10 Internet Explorer11
Google Chrome 70.0.3538.67 or later
Fire fox 62.03 or later
LAN A
LED
Lit Green
: Connected
Flashing Orange
: Transmitting
and receiving data
USF-105AS Rear panel
Web Browser
SNMP Manger
A
L
A
R
M
1
2
AC100-240V 50/60Hz IN
L
A
N
1
L
A
N
A
GENLOCK