63/65
6. Pull the cocking control back until it clicks. You will see a color change inside the
release button when it is ready. (g)
Hold your fingers on the body NOT the cap. (*)
7. Lancing the finger:
Press the lancing device’s tip firmly against the lower side of
your fingertip. Press the release button to prick your finger, then a click indicates
that the puncture is complete. (h)
8. Remove the device from the puncture site. After penetration, remove the first drop
of blood with a clean cotton swab. Gently squeeze the punctured area to obtain
another drop of blood. Be careful NOT to smear the blood sample. Apply the
blood to the test strip. (i)