10
Absorbent Hole
Apply a drop of blood here. The blood will be
automatically absorbed.
Confirmation Window
This is where you confirm if enough blood has
been applied to the absorbent hole in the strip.
Test Strip Handle
Hold this part to insert the test strip into the slot
Contact Bars
Insert this end of the test strip into the meter. Push
it in firmly until it will go no further.
ATTENTION:
The front side of test strip should face up when
inserting test strip.
Test results might be wrong if the contact bar is not fully
inserted into the test slot.
NOTE:
The Pet Gluco meter should only be used with Pet Gluco Test Strips. Using other
test strips with this meter can produce inaccurate results.
Test Strip
