15
1.
Insert the code strip when the monitor
is off. Wait until the code number appears
on the display.
2.
Remove the code strip, the display will
show “OK”. This tells you that the meter
has finished coding and is ready for blood
glucose testing.
BEFORE TESTING
Calibration
You must calibrate the meter every time you begin to use a new vial of
test strips by setting the meter with the correct code. Test results may be
inaccurate if the code number displayed on the monitor does not match
the number printed on the strip vial.
The Pet Gluco meter is supplied with two code strips. There is one for cats,
and one for dogs.
Please check the Pet Gluco meter with the corresponding code strip for
your pet to ensure proper performance.
How to Code the Meter
NOTE:
Make sure the code number on display, code
strip, and test strip vial are the same.
Checking the Code Number
You need to make sure that the code
number displayed on the meter matches
the number on the test strip vial for your
animal type before you proceed. If it
811
811
