U49W BLUE HERON
User Manual
23
360
°
Flips:
Click this icon to do 360° flips.
1-Key Lift:
Click this icon to take off automatically hover at an altitude of around 4 feet.
1-Key Land:
Click this icon to land your drone and stop the propellers.
High/Low Speed Mode:
Your drone starts in Low. Click on “H” to enter High-
Speed Mode.
4. CALIBRATION
5. APP FLYING CONTROL
Always calibrate your drone with your transmitter before flying, and recalibrate after takeoff if you
experience difficult operation.
1. Please refer to the Calibration section (p. 13) for instructions and apply them to the app controls.
2. Move the right “stick” as the picture shown on the right. The drone body lights flash, which indicates
that the drone is calibrating. When the drone body lights become solid, calibration is successful and
the drone is ready to be controlled.
START THE DRONE
Move the left and right “sticks”
down and inward at the same time
to start the drone as shown at right,
or click the 1-Key Lift icon to start
the drone.
Summary of Contents for U49W BLUE HERON
Page 2: ......
