background image

U49C RED HERON 

User Manual

13

PREFLIGHT OPERATION

1.  Fly in an open area and abide by all local and federal guidelines. Check the FAA’s B4UFLY mobile app 

for up-to-date drone flight info. 

2.  Make sure your drone and transmitter batteries are fully charged.

3.  Put the left stick of the transmitter in the middle position.

4.  Follow the Calibration instructions closely. Always turn ON your transmitter first before flying, and 

turn OFF the drone first when you’re finished. 

5.  Make sure the connection is solid between your battery and motor; vibration may cause loosening.  

6.  Make sure the propellers are installed correctly and the motors are working normally after unlocking.

7.  Make sure your drone is facing away from you.

PREFLIGHT CHECKLIST

FIGURE 22

FIGURE 23

CALIBRATION

Calibrate your drone before every use and after crashing for optimum flight. 

1.  Turn on the transmitter, push the left stick all the way down and then release (Fig. 22). The left stick will 

spring back automatically, and is now ready for pairing. 

2.  Power on the drone and place it on a flat, horizontal surface.

3.  Push the right stick down and to the right, then release (Fig. 23). The drone body lights flash, which 

indicates the drone is calibrating. When the lights turn solid, the drone has been successfully calibrated. 
Do not move the left stick before calibration completion. 

NOTE:

Recalibrate your drone after crashes if it is not performing properly.

Summary of Contents for U49C RED HERON


























Reviews: