M-6007-Z460FFT(FRT)
Crate Engine
GUIDE
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD PERFORMANCE PARTS.
Techline 1-800-367-3788
Page 10 of 24
IS-1850-0636
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
STEP 11: Install EGR gasket or block-off, depending on intake manifold style. If the manifold does not have an
EGR passage (no EGR passage on our example) the block-off is used.
STEP 12: Rub an initial thin layer of silicone onto the end rails of the intake manifold and block.