The headlamp switch
can be identified by the
bright bulb symbol.
Always remember to turn on your
headlamps at dusk and dawn and during
inclement weather. Failure to activate your
headlamps under these conditions could result in a
collision.
The OFF position is
indicated on the lever by
the O. When the switch
arrowhead is aligned
with the O symbol, the
exterior lamps are off.
The lights will not operate in the key OFF mode.
The first position above
the OFF position is the
rear tail lamps and
license plate lamp.
The second position
above the OFF position
will illuminate the
headlamps while the
rear tail lamps and
license plate lamps
remain on.
Pulling the headlamp switch rearward while it is in
the OFF position will cause the headlamps to turn
on as long as the switch is held rearward. There are
no high beams on this vehicle. Pulling the headlamp
switch rearward while it is in the ON position will
NOT change the performance of the headlamps.
Lights
13
