![background image](http://html1.mh-extra.com/html/ford/2002-think/2002-think_owners-manual_2318720020.webp)
2. Rotate the
bulb socket
counterclockwise
and pull out to
access the bulb.
3. To remove the bulb, pull it straight out of the
socket.
4. Insert a new bulb into the socket until it is fully
seated.
5. Install the socket into the back of the lamp
assembly and turn clockwise until it is locked into
place.
6. Position the lamp assembly into the vehicle
housing and install the two screws. Tighten the
screws firmly, but do not over-tighten.
Over-tightening can cause damage to the lamp.
Replacing the rear turn signals
1. Unlock and
remove the
decklid (if
equipped).
2. From inside
the rear wheel
housings,
remove the six
rear bumper
bolts and
carefully lower
the bumper.
Lights
20