4
OPERATION
In order to shift into gear, fully press the clutch
pedal before shifting and remove your foot
when shifting occurs.
Do not hold your foot on the clutch pedal on
driving conditions where operation of clutch is
not required.
Choose a lower gear during take-off to ensure
that your clutch has a longer service life. In
case of any load, take off with low range 1 on
hills, and high range 1 gear on straight roads.
CAUTION
Do not take off with your vehicle when the
vehicle is loaded and the transmission is in
high range. Stop the vehicle completely to
engage reverse. Wait for 8 to 10 seconds, and
shift into reverse. Your vehicle’s transmission
may be damaged if you try to shift to reverse
when the vehicle has not come to a complete
stop.
Do not shift to neutral while driving down a
slope.
Do not take off with your vehicle when the
transmission is in high range
Do not use reverse gear when the
transmission is in high range.
Do not use your vehicle in neutral.
Transmission may be damaged as the
lubrication inside the transmission while the
vehicle is moved in neutral for a long time will
be inadequate.
9 S 1310 Manual transmission and shifting
High range 5-6-7-8
Low Range 1-2-3-4
It has 9 gears: 8 f 1 crawler gears.
All gears except the crawler and reverse gears
are synchronized. First 4 gears are called
as low range, and the remaining 4 gears are
called as high range.
Switching between low and high ranges is
provided by the up and down movements
of the latch on the gearshift lever. As shown
below, the transmission will operate in the low
range when the latch is pressed downwards,
and in the high range when the latch is
pressed upwards.
• During the acceleration, to switch from the
low range to high range:
1. Press the latch upwards in the 4th gear.
2. Depress the clutch pedal.
3. Select neutral. (Planetary gear set will be disabled
then, and the transmission will shift to high range)
4. Shift the lever from neutral to ½ range and then 1/5
gear. Transmission will shift to 5th gear when it is in
high range.
5. Slowly release the clutch pedal.
6. Leave the latch in high range.
• 9 S 1310 transmissions have a shift
prevention mechanism to protect the
transmission against incorrect shifts when the
vehicle has reached a certain speed. These
mechanisms prevent shifts to ½ range in
certain speeds for low and high ranges, and
shifts from high range to low range.
Shifting
126
Summary of Contents for Cargo 2017
