Krystal Enterprises
24
HIC900 Throttle Controller Operating Procedures
BCP
(Battery Charge Protection Mode)
Note: This system has been set-up for
Automatic
Battery Charge
Protection
, which becomes active whenever the following enabling
conditions are met:
ENABLING CONDITION:
Vehicle NOT moving (speed=0 MPH).
Service Brake NOT pressed.
Vehicle Transmission Range in Park/Clutch NOT pressed.
RPM's inside of safe operating range.
Transmission Fluid Temperature below 240˚ F.
Engine Coolant Temperature below 230˚ F.
Brake Lights Functional
Foot Off Accelerator Pedal
AUTOMATIC BATTERY CHARGE PROTECTION
Any time your vehicle is Powered-up”, Charge Protection is auto-
matically engaged,
THIS FUNCTION SHOULD NOT NORMALLY
BE DISABLED.
Charge Protection will remain in effect until which time, any of
the above stated ENABLING CONDITIONS are no longer met, or
until you manually dis-engage the BCP button on the DRIVERS
OVERHEAD CONTROL PANEL, see photo at right.
TO DEACTIVATE
“
AUTOMATIC BATTERY CHARGE PROTEC-
TION
” OR “
FAST IDLE”
Do the following:
Press the Manual Engage button on the DRIVERS OVERHEAD
CONTROL PANEL and release.
Fast Idle system will only be turned off when the button is re-
leased.
To exit “
AUTOMATIC CHARGE PROTECTION Mode
”, simply
depress the service brake pedal. See the
Off Road Engineering
literature for specifi c details regarding other operating parameters.
Quick Reference Guide
Fast Idle Switch is shown as mounted
on Driver’s Overhead Control Panel (ref. page 20)
Summary of Contents for Econline Super Duty Chassis 450 1998 Series
Page 2: ...ProCarManuals com ...
Page 39: ...Krystal Enterprises 39 THIS PAGE IS INTENTIONALLY BLANK ProCarManuals com RETURN TO MENU ...
Page 95: ...Krystal Enterprises 95 95 THIS PAGE IS INTENTIONALLY BLANK ProCarManuals com RETURN TO MENU ...
Page 107: ...Krystal Enterprises 107 107 F 550 Shuttle Bus Wiring Diagram ProCarManuals com RETURN TO MENU ...