M-5230-V6
Mustang V6 Dual Exhaust Kit
INSTALLATION INSTRUCTIONS
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS.
Techline 1-800-367-3788
Page 1 of 5
IS-1850-0277
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
Please visit www.fordracingparts.com for the most current instruction information
! ! ! PLEASE READ ALL OF THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION.
AT ANY TIME YOU DO NOT UNDERSTAND THE INSTRUCTIONS, PLEASE CALL THE FORD RACING
TECHLINE AT 1-800-367-3788 ! ! !
OVERVIEW:
The use of a floor hoist is recommended for this installation. If you do not have access to one, use a hydraulic floor
jack and jack stands to raise the vehicle.
KIT INCLUDES:
Item # Qty
Description
1
1
M-5230-GTA Muffler Kit
2
1
RH Intermediate Pipe
3
1
LH Intermediate Pipe
4
4
X-Pipe Clamps
5
2
LH Brackets
6
2
Rear Fascia Trim and Fastening Hardware
7
1
V6 X-Pipe
8
2
Brackets Bolts
NOTE:
Please check kit contents before starting work on the vehicle.
INSTALLATION INSTRUCTIONS:
STEP 1:
Remove negative cable from battery.
STEP 2:
Raise vehicle and apply parking brake.
STEP 3:
Loosen clamp at the rear of the Y-pipe assembly and on the muffler (use penetrating oil if
necessary).
! ! ! CAUTION: JACK STANDS MUST BE USED ON A LEVEL SURFACE AND BE SECURELY SEATED.
FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY OR VEHICLE DAMAGE ! ! !
! ! ! CAUTION: PERFORM THE FOLLOWING WORK ON A COLD VEHICLE ONLY ! ! !