When the engine is cold, check the
level of the engine coolant in the
reservoir.
•
The engine coolant should be at the “cold fill level” as listed on the
engine coolant reservoir.
•
Refer to the scheduled maintenance guide for service interval
schedules.
•
Be sure to read and understand
Precautions when servicing your
vehicle
in this your
Owner’s Guide.
If the engine coolant has not been checked at the recommended interval,
the engine coolant reservoir may become low or empty. If the reservoir is
low or empty, add engine coolant to the reservoir. Refer to
Adding
engine coolant
in this chapter.
Note:
Automotive fluids are not interchangeable; do not use engine
coolant, antifreeze or windshield washer fluid outside of its specified
function and vehicle location.
Adding engine coolant
When adding coolant, make sure it is a 50/50 mixture of engine coolant
and distilled water. Add the mixture to the coolant reservoir,
when the
engine is cool
, until the appropriate fill level is obtained.
COLD FILL
RANGE
2007 05+ Mustang
(197)
Supplement
USA
(fus)
Maintenance and Specifications
30
