1 - 32
ForeRunner
ATM Switch Network Configuration Manual
Configuring PVCs
1.5.4 Creating a SPANS SPVC
To create a SPANS SPVC, you must configure both ends of the connection concurrently on the
two switch fabrics. This means you must have an AMI session open on both the local switch
fabric and the destination switch fabric. To create a new SPANS SPVC, log in to AMI and enter
the following parameters:
myswitch::configuration spvc spans> new
<port> <vpi> <vci> <dest-session> <dest-port>
<dest-vpi> <dest-vci>
\
[-peak
<Kb/sec>
] [(source | destination | bidirectional)]
These parameters are defined as follows:
NOTE
To create a bidirectional SPANS SPVC, you must
either specify bidirectional, or you must set up
two unidirectional SPANS SPVCs with one going
in each direction.
Parameter
Description
port
The port number on the local switch fabric.
vpi
The virtual path number on the local switch fabric.
vci
The virtual channel number on the local switch fabric.
dest-session
The IP address of the remote switch.
dest-port
The port number on the remote switch fabric.
dest-vpi
The virtual path number on the remote switch fabric.
dest-vci
The virtual channel number on the remote switch fabric.
-peak <Kb/sec>
The amount of peak bandwidth allocated for this SPANS SPVC, specified in kilobits per
second. The default is
0
.
source | destination | bidi-
rectional
source
means a unidirectional SPANS SPVC going from the local switch fabric to the
remote switch fabric will be created.
destination
means a unidirectional SPANS SPVC
going from the remote switch fabric to the local switch fabric will be created.
bidirectional
means the pair of unidirectional SPANS SPVCs will be created. The
default direction, if you do not specify one, is
bidirectional
.
Summary of Contents for forerunner series
