PLACE ONE
18206958
( OSB ROOF) ON TOP OF A
28281820
(BATTEN).
ENSURING THAT EDGES OF
28281820
(BATTEN) AND
18206958
( OSB
ROOF) ARE FLUSH, SECURE
18206958
(OSB) TO
28281820
(BATTEN)
WITH 30mm NAILS PLACED AT 300mm INTERVALS. REPEAT
PROCEDURE FOR SECOND ROOF SECTION.
5
3
6X4SHEDBRDFL
ABQ46PEV2
X 3
2
POSITION
ABQ46PEV2
(PLAIN END) OF SHED ONTO FLOOR SO THAT THE LEFT
AND RIGHT HAND EDGES OF THE PANEL ARE FLUSH WITH THE EDGES OF THE
FLOOR. PLACE THE
ABQ46PSV2
(PLAIN SIDE) ONTO THE FLOOR AND PLACE UP
AGAINST
ABQ46PEV2V
(PLAIN END) PANEL. SECURE
ABQ46PSV2
(PLAIN SIDE)
TO
ABQ46PEV2
( PLAIN END ) USING 3 x 50mm SCREWS PLACED AS SHOWN TO
LEFT.
DO NOT SECURE THE PANELS TO THE FLOOR AT THIS POINT.
SIDE PANEL
BACK PANEL
USING PROCEDURE OUTLINED IN STEP 3, POSITION AND SECURE THE
REMAINING
ABQ46WSV2
(WINDOW SIDE) AND ABQ
46DEV2
( DOOR
3
4
X 10
X 9
ABQ46DEV2
ABQ46WSV2
ONCE ALL FOUR OF THE PANELS ARE IN PLACE AND FASTENED TOGETHER,
SECURE THEM TO THE FLOOR USING 50mm SCREWS. EACH OF THE
ABQ46PSV2
(PLAIN SIDE)AND
ABQ46WSV2
(WINDOW SIDE) PANELS
REQUIRE 3 SCREWS AND
ABQ46PEV2
(PLAIN END) AND
ABQ46DEV2
(FRONT
END) PANELS REQUIRE 2.
IT IS VITAL THAT ALL SCREWS ARE POSITIONED SO THAT THEY LOCATE
INTO FLOOR BEARERS.
18206958
28281820
ISSUE 0113
ABQ46PSV2
6X4SHEDBRDFL
