28
32
14
M
X3
M
X4
M
X3
H
C
G
X2
G
X3
D
J
B
From outside place a Z strip so that it sits against
and on top of the overlap board as shown below.
Fix with panel pins.
GLAZING
DO NOT remove the
protec"ve film on any of the
glazing un"l the building is
completed.
From outside posi$on the
bolt against horizontal bar on the
door making sure that it will hold
the doors closed in the locked
posi$on.
(Use 25mm screws)
Place a turn bu# on at the top and
bo# om of the le& hand door and
fix using the silver 30mm screws
Fix the hinges to the door, fixing the
smaller part of the hinge, using 2 x 25mm
screws.
Posi$on the doors inside the entrance
and fix the hinge to the frame using
25mm screws.
Fix to door
Fix to door end
From inside place the glazing against the window fame and so that it sits in
the Z strip.
Place the glazing strips against the glazing at the bo# om and sides fixing them
to the framing using the panel pins.
From outside fix a glazing strip against the bo# om of the glazing and the Z strip
using 3 x panel pins.
14
27
M
X3
Measure and cut each
Z’ strip to size using a
pair of scissors.
Take care
Inside
Outside
25
I
M
M
32
11
12
13
14
