DUOCUT 10 Ton Manual Log Splitter
11
Assembly
Step 6
Attach the log platform(16) to
the 2 support arms using the
4 M6 countersunk bolts(18)
and 4 M6 nuts(17).
After attaching, the top
surface of the platform should
be just above the edge of the
lower axe blade. If it is not,
open the jack release valve
and check that the lower axe
blade is fully returned.
M6x15 CSK
M6 nut
Step 7
Insert the end of the top
handle(2) (without the hand
grip) through the large holes
at the top of both sides of
the splitter post and push the
remaining hand grip(19) over
the end of the top handle.
