DUOCUT 10 Ton Manual Log Splitter
HorizontalOperation
20
Step 2
Stand slightly to the left of the
splitter and operate the left
lever slowly until the locking
pins click into place.
DO NOT
support or steady
the log by hand.
Continue to operate the left
lever. As resistance is felt to
increase the splitter will tend
to lift off the ground. At this
point you should switch to
right lever only operation.
Step 3
Push forward on the left lever with
one hand, this will stop the splitter
lifting and pump with the right
lever to finish splitting the log.
Once the wood starts to split, it
may be possible to switch back to
using the left lever to speed up
splitting
Remove the split log and stack
away from the splitter. Clean away
any debris from the splitter.
push forward
