DUOCUT 10 Ton Manual Log Splitter
21
Horizontal Operation
Anchoring
If the Duocut is being used
on suitable ground, the
end of the Duocut can be
anchored to the ground by
pushing a spike or other
suitable anchor through
the hole in the back of the
splitter post.
anchor hole
Depending on the structure of the logs you are splitting,
during operation individual logs may split from both
ends or only from the top or bottom. However if a knot is
encountered at one end the splitter will continue to split the
log from the other end.
Wipe down the log splitter to remove tree sap or dirt after
each use and tidy the work area ready for the next work
session.
When the splitter is not in use, thoroughly clean it and store
it in a dry location with the hydraulic pump at it’s lowest
position to minimise corrosion.
Step 4
Open the release valve to allow the lower blade to return
then close the release valve.
