background image

DUOCUT 10 Ton Manual Log Splitter

Warranty

24

This product carries a limited parts warranty for 1 year from 
the date of purchase. Please keep your proof of purchase as 
this will be required for any claim.

Should this product become defective, contact the store 
where it was purchased and either replacement parts will be 
issued, it will be repaired or it will be replaced free of charge.

IMPORTANT: NO RESPONSIBILITY IS ACCEPTED FOR 
INCORRECT USE OF THIS PRODUCT.

NOTE:

 It is our policy to continually improve products and as such 

we reserve the right to alter data, specifications and component 
parts without prior notice.

Manufactured under license for Forest Master Limited.

Registered Office: 

Forest Master Ltd, Industry Road, Heaton, Newcastle Upon Tyne, 

NE6 5XB, United Kingdom.

Tel: +44 191 2966939

email: info@forest-master.com - web: www.forest-master.com

NOTE: The maximum force of the hydraulic jack has been 
preset to 8 US Tons in order to increase the life of the 
unit. Due to the use of twin Duocut blades this should be 
sufficient in all circumstances. However the jack can be 
adjusted to deliver 10 US Tons of force but this must only be 
done by a qualified engineer.

De-commissioning product: Should the product become 
completely unserviceable and require disposal, draw off the 
oil into an approved container and dispose of the product 
and the oil according to local regulations.

Maintenance

Summary of Contents for DUOCUT

























Reviews: