07/2016 WDOC Diamond remote
www.forestgroup.nl
v1.4
FOREST MULTI RECEIVER / WALL SWITCH ̶ 5201001360 / 1361
FOREST FMS/BCS MULTI RECEIVER ̶ 5104011500
TECHNICAL SPECIFICATION SHUTTLE M RECEIVER:
TECHNICAL SPECIFICATION FMS/BCS RECEIVER:
● powered by Shuttle M
● power 230Vac – 500W
● can also be used as wall switch
● controls one tubular or FMS motor
● cable 0,5mtr → 5201001360
● can also be used as wall switch
● cable 3,5mtr → 5201001361
● terminal max 2,5mm²
● connect to port 1 of the Forest Shuttle M
● working temperature -10°C - +50°C
● working temperature -10°C - +50°C
● controlled by Forest Multi Remote and
Forest Multi Wall Switch RF
program button
control led
OPEN/UP button
STOP button
CLOSE/DOWN button
use screwdriver
to take of cover
press program button, led will blink
press program button, led will blink
press STOP and CLOSE button of
receiver for ~6 sec.
press STOP button
press STOP button
led will blink and will go off
hold the remote within 2 mtr
from receiver. Select channel
select (to be removed) channel
and press OPEN button:
and press CLOSE button:
led blinks 3 times and will go off:
led will blink once and will go off:
Do not mount within 1 meter
from other equipment and
receivers. This will
interfere with
the receiver.
PROGRAMMING REMOTE
REMOVE PROGRAMMED CHANNEL:
DELETE ALL PREVIOUS
TO RECEIVER:
PROGRAMMED CHANNELS:
