Step 9 - Attaching Windows
Step 10 - Door & Hinge Assembly
Step 11 - Attaching Door Lock
Step 12 - Finial & Turn Buttons
12 x
1.6 x 25mm
Nails
3
Each
Batten
Window Frame
Size: 695x574mm
Window
Size: 623x502mm
Glazing Strip (Small)
Size: 15x12x508mm
Glazing Strip (Large)
Size: 15x12x629mm
Glazing Strip (Large)
Size: 15x12x629mm
Glazing Strip (Small)
Size: 15x12x508mm
4x
25mm
Screws
HINGE
4x
25mm
Screws
HINGE
Door
Size: 1705x883mm
Step 7 - Attaching Drip Strip
Step 8 - Window Assembly
Line up
With Rear
Battens
Drip Strip
Size: 28x28x1375mm
3x
50mm
Screws
3x
25mm
Screws
3x
25mm
Screws
Into
Hinge
2x
25mm
Screws
2x
25mm
Screws
2x
25mm
Screws
Casement
Stay
INSIDE VIEW
2x
25mm
Nails
2x
25mm
Nails
Finial
Size: 205x100mm
Finial
Size: 205x100mm
8x
50mm
Screws
Fixed Window:
2 x 50mm screws on the top
2 x 50mm screws underneath
3x
25mm
Screws
3x
25mm
Screws
Note:
There is 1 fixed window & 1 opening window
.
2x
25mm
Screws
50mm
50mm
4x
40mm
Screws
Block
Size: 97x20x150mm
HINGE
HINGE
FRONT
3x
25mm
Screws
escut-
cheon
2x
25mm
Screws
1.
2.
Ensure the drill holes are
aligned enough for the spindle to
fit the handles and enable the lock
mechanism to work.
3.
The escutcheon will cover the
hole created for the lock
mechanism. Again, ensure they
are aligned.
DRILL 20mm HOLE
DRILL 20mm HOLE
DRILL 25x10mm HOLE
Spindle
3x
50mm
Screws
Supplied
With
Rim-lock
HANDLE
RIM-
LOCK
HANDLE
2x
50mm
Screws
4.
Secure the lock receiver onto the
front panel frame. Align with the
lock, ensuring the lock will remain in
the receiver once the door is closed.
Screw the block to the door panel. Ensure the hinges are on the
opposite side to the block as shown above.
Screw all the way through
the block and the door
panel.
Frame
Behind
Into
