background image

BEFORE YOU START

.

BASE PREPARATION

It is vital that you build your new 

summerhouse

 on a solid, level base. Timber or plastic bases are ideal, as are concrete  

 slabs or solid concrete.

Timber Base

Self-constructed/ 

Buy pre-made

Concrete

Concrete surface/ 

Concrete slabs

Pro Shed Base

Interlocking         

eco-friendly base

Broken Slabs/Gaps

Uneven slab sizes 

with no cement

Soil

A base of soil or    

grass only

If you have an existing base and think it’s suitable for your new 

summerhouse

 to be sited on, it is important you check that it is 

level and doesn’t deviate by any more than 15mm from edge to edge. If this is not the case, the building will twist, causing 

gaps to appear in the sections and causing the roof, doors and windows to misalign.

There is more information on base preparation on our website

 www.forestgarden.co.uk

TOOLS NEEDED

We recommend using the following tools (not supplied):

Assembly is relatively straightforward if you follow these step-by-step instructions. We recommend aligning components 

aproperly before securing them together and 

pre-drilling screw holes to avoid splitting the timber.

.

Tape Measure

Sharp Knife

Pozidrive 

Screwdriver

Drill & 2mm     

Drill Bit

Hammer

Ladder

Spirit Level

MUST PRE DRILL

Important : Assembly of this 

shed requires a minimum of 

two adults.

PLEASE KEEP PLASTIC BAGS AND SMALL PARTS AWAY FROM CHILDREN

We recommend that, before you begin your summerhouse assembly, check all the components, using the fixing pack 

contents list on the front page and the summerhouse components list on the fourth page.

Summary of Contents for TPCSUM88









Reviews: