24
01-PGOA-FR-EN-0001 NT ED01
“Troubleshooting” practical advice
ANOMALIES
POSSIBLE CAUSES
SOLUTIONS
Gas doesn't go
Empty gas cylinder
Change gas cylinder
Defective regulator
Change the regulator
Unprimed regulator
Prime the regulator
Regulator valve in
closed position
Open the regulator valve
No spark when I light
my Plancha
Defective battery
(depending on model)
Change the battery
Battery in wrong direction
Check the direction of the
battery
The hose is not
connect to the plancha
Hose not approved
Replace the hose with an
approved model (see chapter
“gas connection”).
Hose connection direction is
incorrect
Check the direction of the
hose
Grease fl ow error
Hotplate tilt error
Adjust the inclination of the
hotplate using the adjusting
screws (depending on model).
Ensure that the Plancha or its
support are level.
Grease pan positioning error
Check the positioning of your
grease pan.
If despite the recommendations your problem persists, please contact your
distributor.
Contrôle qualité
