Vibrating table 3000 RPM
page: 2
310 x 310 mm
Acceptance
Test outside conditions of delivery. The delivery should be compared
to the bill of lading and checked whether all is complete. It is also
to check whether all regular accessories are included in the delivery.
This is to see in this booklet under "general data", in the machine card or on a
special page. Special accessories could be seen on the packing list.
If damage is to be suspected it has to be recorded immediately.
The extent of the damage should be described as exact as possible on
the bill of lading or any other document or else, the delivery of the
machine should be refused.
If any damage due to the transport is noticed after acceptance only,
the agent should be informed immediately and a record should be made
on the spot, either in his or his representative's presence. Do not touch
anything before the above mentioned record has been made.
After the damage has been recorded and the document has been signed by
the agent or his representative, we beg to inform us as exact as possible about
the extent of the damage. This information will enable us to judge whether the
damage could be repaired
o
with spare parts
o
requires the presence of one of our mechanical engineers
o
whether the whole machine must be returned to our factory.
If there is no objection or damage in transit, the completeness of the batch
is to be checked on the basis of the bill of delivery.
