Operator's Manual
3950 Series
Automatic Setting
45
Each menu is divided into a light and a dark section.
Actual data is shown in the light section (1).
In the dark section (2), additional menus are displayed, which can also be called up
by pressing the function keys.
The last line in the light section is the "command line" (3) and serves as an operator
guide.
This "command line" is very important because it indicates which command must be
carried out next.
1
3
2
The keys on the operator panel are secured against incorrect operation, which means
that malfunctions caused by unacceptable inputs or accidental pressing of keys will
be prevented. Keys that are not used are automatically made inactive.
To help you familiarize yourself with this new system, the commands of the most
important settings are explained step by step on the following pages.
The sequence of the commands is shown by numbered input lines (4) so you will
quickly understand the logic of the procedure.
Examples:
1.
Press key C
The BASIC menu is displayed.
4
2.
Press key F3
The SET-UP menu is displayed.
By following the sequence shown and observing the instructions, you will soon master
the operation of the machine and benefit from the advantages of the computer control.
If you get confused while entering commands, simply return to the
BASIC
menu by pressing key
C
and start again.
The following operating instructions are arranged in such a way that all main menus
are described, starting with
COUNTER
and finishing with
JOB
.
JOB SAVED:
FORMAT (mm):
LENGTH:
WIDTH:
FOLD
IN FOLD UNIT:
9999
111
111
1:
2:
AFTER ENTERING NUMBER:
--------- SELECT ----------------
JOB
CONTENTS
FOLD
SET-UP
