Formax FD 160, Operator And Maintenance Manual

2

OPERATION

SAFETY GUIDELINES

1.  Switch machine on to activate rollers.
2. Choose the correct staple position according to the sheet size. They will click into place along the 

holding shafts.

3. Set the paper guides. Place the sheets under the rollers and align them to side guide A.
4. Set the sliding paper guides to hold sheets in position.
5. Press down the stapling handle to complete stapling.
6. Lift up the stapling handle and fi rmly press down to the other side and hold. The stapled sheets will be 

fed up through the fold rollers to complete the booklet.

7. Repeat steps 2-6 for additional booklets.
8. Switch off power after completing project.

SIDE STAPLING

1. Switch machine on.
2. Choose and set the staple position according to the sheet size.
3. Depending on the staple position, align the sheets to side guide A or side guide B.
4. Set side distance and hold the sheets in place.
5. Press down the stapling handle.
6. Repeat steps 2-5 for additional side stapling.

* When machine is running, keep hands away from the rollers.
* Do not remove any covers. The machine contains high-voltage parts and hazardous moving parts, which  

   may cause 

  electrical shock or personal injury.
* Don’t touch the motor, the surface may be hot during operation.
* Always turn off and clean machine after use.