11
_________________________________________________________________________________
4 INSTRUCTIONS FOR USE
4.1 Standard use
Switch on with the main toggle switch next to the power
cord input.
Turn the rotary control switch to approx. 70-100% (position 7 ... 10).
Set the five transport rollers by moving the axis of its lever arms in the
areas along the back side as close as possible to the envelope flap.
The flaps may under no circumstances pass under the feed
rollers!
This ensures that envelopes with long flaps can be
transported and closed effortlessly.
Place all the envelopes of the same width together, place the flaps all on the
same side.
The
infeed tray
should be positioned with an additional 2mm space around
the edge of the envelope and for longer formats they should open to the
left.
Place the envelope pile in the
outfeed
tray according to the envelope size
set.
With the left hand take a stack of envelopes, all with the same side facing
up and the envelopes staggered up towards the back.
Only place the stack on when the conveyor belt is running so
that bottom envelope is always taken first!
Take the sealed envelopes out of the
outfeed tray
and press the top flap lightly.
More stacks of envelopes can be added while running.
When idle, adjust the speed control using the rotary knob to position "0"
and if necessary, turn the machine off completely.
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
