27
4. Tools
The Tools Menu
Tools
The Tools sub-menu contains a number
of options that will allow the user to:
• Fine adjust settings for the Square
Fold option,
• View and reset the counter,
• Choose the Units,
• Select the language,
• View the Software Version installed
on the machine.
The Service Mode is to be used only
by authorized technicians.
Squar
ing
Fine Adjustment
Squar
ing
Fine Adjustment
Press [Square Fold Fine Adjust] to get
to the Fine Adjustment sub-menu.
This function works as a pre-adjustment
for the Square Fold function and should
be used
only
if the regular adjustment
of the Square Fold of the booklet does
not give the expected results (see
section 2 of this manual).
If the machine produces a too sharp or
too soft
a squre
on the booklets,
the user can lower or increase its
squaring
preset by pressing
[+] for sharper edges and [-] for softer
edges.
Press the Green Check mark to
confirm the changes and return to
the previous menu. Otherwise, press
the red cross to discard changes and
return to the previous menu.
Summary of Contents for Square IT 2
