Formica Foliant 370T, Instruction Manual

7 

2.2 The following standards and regulations have been used for the construction of the 

equipment. 

Machinery  

N V no. 170/1997 Sb.

 (Directive 98/37/EC) 

stipulating technical requirements for machinery, as amended by government regulation no. 
15/1999 Sb. and government regulation no. 283/2000 Sb. 

 
CSN (Czech National Standard) EN 292-1

:1994 (EN 292-1:1991) 

Safety of machinery. Basic terms, general principles for designing  
Part 1: Basic terminology, methodology. 

CSN EN 292-2

:1994

+A1

:2000 (EN 292-2:1991+A1:1995) 

Safety of machinery. Basic terms, general principles for designing 
Part 2: Technical principles and specifications. 

CSN EN 294

:1993 (EN 294:1992) 

Safety of machinery. Safe distances for avoiding contact of upper limbs with dangerous 
points. 

CSN EN 953

:1998 (EN 953:1997)   

Safety of machinery. General requirements for design and construction of protective covers 
(fixed, movable). 

CSN EN 954-1

:1998 (EN 954-1:1996) 

Safety of machinery. Safety elements of control systems. Part 1: General principles for 
construction. 

CSN EN 1050

:1998 (EN 1050:1996) 

Safety of machinery. Principles for stipulating rate of risk. 

CSN EN 563

:996 (EN 563:1994) 

Safety of machinery. Temperatures of surfaces accessible to contact. Ergonometric 
parameters for determining temperature limits of hot surfaces. 

CSN ISO 7000

:1996 (ISO 7000:1989) 

Pictograms replacing notices on equipment. Glossary and comprehensive table of pictograms. 
 

Electrical equipment 

N V c. 169/1997 Sb. 

(Directive 89/336 EWG) 

stipulating technical requirements on products for electromagnetic compatibility, as amended 
by government regulation no. 282/2000 Sb. 

N V c. 168/1997 Sb. 

(Directive 73/23 EWG) 

stipulating technical requirements on low-voltage electrical equipment, as amended by 
government regulation no. 281/2000 Sb. 
 

CSN EN 60335-1

:1997 (EN 60335-1:1994)  

Safety of electrical household appliances and appliances with similar purpose. Part 1: General 
requirements  

CSN EN 61000-3-2+A12

:97 (EN 61000-3-2+A12:1996)   

Electromagnetic compatibility (EMC)  – Part 3: Limits  – Section 2: Limits for emissions of 
harmonic current (equipment with input phase current <=16 A) 

CSN EN 61000-3-3

:1997 (EN 61000-3-3:1995) 

Electromagnetic compatibility (EMC)  – Part 3: Limits  – Section 3: Reducing voltage 
oscillation and flickering in low-voltage distribution networks for equipment with nominal 
current <=16 A 

CSN 33 0120

:2001 (IEC 38:1983) 

Electromagnetic regulations. IEC standardized voltage. 

CSN EN 1037

:1997 (EN 1037:1995)