background image

3

Thank you for purchasing a 

FORNO

 product. Please read the entire instruction manual before operating 

your new appliance for the first time. Whether you are an occasional user or an expert , it will be beneficial 

to familiarize yourself with the safety practices, features, operation and care recommendations of your 

appliance. 

Both the model and serial number are listed inside the product. For warranty purposes, you will also need 

the serial number, the date of purchase & a copy of your proof of purchase. 

Record this information below for future reference.

Use these number in any correspondance or 

service calls concerning your product. 

If  you  received  a  damaged  product, 

immediately contact 

FORNO.

 

Save  time  and  money.  Before  you  call  for 

service, check the Troubleshooting Guide. It 

lists the causes of minor operating problems 

that you can correct yourself. 

SERVICE IN CANADA & UNITED STATES 

Keep the instruction manual handy to answer your questions. You can also find all the information 

you need online at www.fornoappliances.com.  

 If you don't understand something or you need more assistance, please visit our website or call 

our Customer service: 1 866-231-8893 opt.2 ext.214 

Or email : mysupport@forno.ca 

If there is a problem, please contact FORNO customer service. All warranty work needs to be 

authorized by FORNO customer service. All of our authorized service providers are carefully 

selected and rigorously trained by us.

 

Summary of Contents for FFSGS6125-30



































Reviews: