YOU NEED TOOLS FOR INSTALLATION. (not supplied with the range)
Screwdriver
Wrench
Socket wrench
Allen key
Tape measure
&Pencil
Protective
gloves
Hammer
Adjustable
wrench
Adjustable
pliers
Drill
Door handle installations
The door handle is not pre
-
installed. Follow the illustrations
below to install the door handle quickly and
easily
.
1. Remove the black rubber cap on the inside of oven door. (Do not throw it away).
2. Insert the screwdriver to the hole to reach the embedded screw.
3. Position the handle holder correctly to accept the screw bolt on the outside of oven door, tighten the
screw.
4. Repeat step No. 1 to 3 for the other side.
5. Put the black rubber caps back to cover the two holes on the inside of oven door.
Cooktop Burner Grills Installation
Remove the packing materials from the cooktop burner grills.
Place the burner grills to the correct position. Check the
direction of middle grill on the right as illustrated, the thicker
side should be towards the left.
Put the cook plate (for FFSGS6156-48 only) and the wok
support to the burner(s) you like to cook.
11
Summary of Contents for FFSGS6156-30
Page 1: ...FFSGS6156 30 FFSGS6156 36 FFSGS6156 48 09 03 21 dd mm yy...
Page 28: ...Wire Diagram 28...
Page 29: ...29...
Page 30: ...30...