P a g e
|
3
CE Certificate
......................................................................................................................................
55
Introduction
Thank you for becoming the owner of this Redwood Global Ltd, Forst TR6
woodchipping machine. By observing the contents of this manual, we hope the
machine gives safe and productive service. This user manual is intended for the
owner/operator to safely and effectively operate this machine and carry out routine
maintenance between services. This is not a comprehensive service manual. See
Service Schedule for routine maintenance and when to take the machine to a service
specialist. For engine maintenance, please refer to the engine manual supplied with
this machine.
This machine has been through a pre-delivery inspection before leaving the factory
and is ready to use.
Before use and as a minimum, the safety and machine operation
sections covered on pages 4 to 22 must be read and understood.
Failure to do so could result in serious injury or loss of life to the
operator and others nearby
.
Also, damage to property and this machine may
occur. Please observe and obey all warning signs (decals) located on the machine.
Their meaning is covered in this manual under decals.
All personnel working with this machine must be adequately trained in its use and
most importantly, follow the advice on safe working practices.
A tiltbed variant is available and documented within this manual with the basic
tracked machine shown in illustrations by default.
Redwood Global Ltd endeavour to continuously develop and improve its products.
They reserve the right to make changes at any time, without notice or incurring any
obligation.
Continuous improvement will affect machine design and production so there may be
minor discrepancies between the actual product and this manual.
This manual must remain with the machine for reference by operators and includes
hiring or if the machine is resold.
Purpose of machine
The Forst TR6 is designed to reduce wood material up to 150mm diameter to
woodchip. This machine is capable of processing up to 5 tonnes of wood per hour.
Summary of Contents for TR6
Page 5: ...P a g e 4 ...
