Running the automatic feeder
73
4. In
Temperature
, specify the desired temperature for the extra portion. The temperature
may not exceed
45°C
. The default setting is the value that you defined in
> Device
data > Portion > Set temp.
.
5. In
Concentr.
, specify the desired concentration for the extra portion to be mixed. You can
enter values between 5 g/l and 255 g/l. The default setting is 150 g/l.
6. Confirm
Start?
by choosing
in order to start dispensing the extra portion.
6.5.5
Checking and changing feeding data for individual animals
In
Animal
, you check and change feeding parameters for individual calves.
6.5.5.1 Group membership
You allocate a registered calf to a group as follows:
1. Choose
> Feeding > Animal
to go to the
Animal
submenu.
2. Choose
to select the desired animal number.
3. In
Group
, choose
to select A, B, C or D.
The prompt
Animal no. in group [A, B, C or D] transfer?
appears.
4. Confirm the message with
.
The calf is registered in the desired group.
6.5.5.2 Feed quantity
You change the feed quantity of an individual calf as follows:
1. Choose
> Feeding > Animal
to go to the
Feed
submenu.
2. Choose
to select the desired animal number.
3. Confirm your entry by choosing
.
4. In
Deviation
, enter the number of days (validity period) on which the calf is to receive a
modified feed quantity. You can enter values between 0 and 99. The default setting is
0 days.
5. In
Quantity
, you enter the additional feed quantity that the selected calf is to receive. You
can enter values between 0 and 25 l. The default setting is 0.0 l.
6. In
Plan
, you can check the feed quantity to which the calf is entitled according to the plan.
Summary of Contents for TAP5-CH2-25
