There are 2 ways to connect the ECSPHB to the
Cli App.
EZ Mode and AP Mode.
AP mode is for use if EZ Mode has failed.
EZ Mode
Step 1
Ensure the system is disarmed before this operation.
Firstly press and hold the “connection button” for 5 seconds.
You should hear a single bleep, and the green LED should
start flashing rapidly, you alarm is now in EZ Connection mode.
Step 2
On the “Cli” App, press Add “+”, “ESP”,
“Smart Alarm Hub with Backup Battery”.
Step 3
Enter the Wi-Fi password of the router which the Hub will be
connected to.
Step 4
Now you can set the alarm name to finalise the device.
Installation
