10
HOW TO INSTALL THE MACHINE
Before installation and start-up of the Self-Wash machine, following operations need to be performed:
Indicate the place (700 x 513 mm width x depth) where the
machine will be installed.
Installation holes will be done directly during the installation.
It is recommended to pour the foundation slab with installa-
tion hole, min. thickness 20 cm.
Feed the indicated place with permanent water connection,
3 phase 400 V electric supply and eventual filthiness drain
from the vacuum cleaner (pipe dimameter 100 – 110 mm),
according to below drawing.
1
2
FRONT
WATER
CONNECTION*
POWER
SUPPLY
FILTHINESS DRAIN
CONNECTION*
RIGHT SIDE
REAR
* OPTIONAL