background image

FUNCTION

FUNCTION

MODE 1

BUTTON 1

MODE 2

BUTTON 2

MODE 3

BUTTON 3

MODE 4

BUTTON 4

MODE 5

BUTTON 1 AND 2

MODE 6

BUTTON 3 & 4

1

Add Remote 

Program Driver 1  

Program Driver 2 

2

Programmable Output

(+) Ign/Acc/Start 

(FUNCTION 31 

MODE 4)

White  (+)Ignition2

White  (+)Accessory2

White (+)Start2

White (+)Start

Orange (+)Accessory

Orange (+)Accessory

Orange (+)Accessory

Orange (+)Ignition2

Pink (+)Ignition

Pink (+)Ignition

Pink (+)Ignition

Pink (+)Ignition

Yellow (+)Start

Yellow (+)Start

Yellow (+)Start

Yellow (+)Start2

3

Tachless sensivity

Increase 

crank time

(By default)

Decrease 

crank 

time

4

Remote car starter 

runtime

Gas: 15 minutes

Diesel: 30 minutes

Gas: 7 minutes

Diesel: 14 minutes

Gas: 3 minutes

Diesel: 6 minutes

5

   NOT USED

   —

6

Doorlock option

No

Unlock before remote-start & 

Lock after remote-start.

Lock after remote-start.

Unlock and relock after 

shut-down.

Relock 10 sec.after 

shut-down.

Disarm before 

shut down.

7

Ignition Doorlock 

option

No

Lock after foot-brake & 

unlock after key is turned 

OFF.

Unlock after key is turned 

OFF.

Doorlock Output at 

Ignition only.

8

Unlock Pulse Time

Single 0.25 sec

Double 0.25 sec

Single 4.0 sec

Single 2.5 sec

Single 1.5 sec

Single 0.75 sec

9

Active or Passive 

Alarm & Starter Kill. 

Active

Press LOCK to activate 

the Alarm and starter-kill.

Passive (Lock disabled)

Arm alarm activate 

starter-kill 30(MODE 

4), 60(MODE5), or 

120(MODE6) sec. after the 

door is closed.

Passive (Lock enabled)

Arm alarm, activate 

starter-kill and lock doors 

30(MODE 4), 60(MODE5), 

or 120(MODE6) sec. after 

the door is closed.

Passive arm

30 seconds (by default 

if MODE 2 ot 3 is 

activated.

Passive arm

60 seconds. (if 

MODE 2 ot 3 is 

activated.

Passive arm 

120 seconds. 

(if MODE 2 ot 3 

is activated.

10

Starter Kill Output. 

Required function 32 

mode 4. - Dk.Blue 

(A8) = starter-kill.

Starter-kill &anti-grind

Anti-grind only

Relay normally open

11

Sound Confi rmation 

& LED antenna 

Antidémarreur

1st LOCK/UNLOCK silent

2nd LOCK/UNLOCK 

sound

---------------------------

Antenna LED active.

LOCK/UNLOCK 

sound always.

Antenna LED disabled.

Antenna LED disabled 

with ignition.

Confi rmation sound 

at LOCK only

Panic mode 

disabled

12

Output horn/siren 

confi guration

Horn(-) only.

Siren(+) Output (E1) white

Siren(+) Output (E1) white 

and Horn(-) 

Siren(-) only (A7)

13

Confi rmation Pulse

Long

Short

14

Alarm  ON/OFF

Starter  ON/OFF

Alarm OFF

Remote-starter ON

Alarm ON 

Remote-starter ON.

Alarm ON

Remote-starter OFF

15

Smart Arming 

Smart Doorlock 

Smart Lock pulse

Disable

(Unlock signal) Automatically 

LOCK and rearm alarm if 

door(s) are not opened after 

30 seconds.

Automatic Lock when 

starter kill arms.

Lock pulse only when its 

Unlock

16

Cold Start Timer

3 hours at -5

o

c/Runtime

1.5  hours at -5

o

c/Runtime

3 hours at -5

o

c/5 minutes

1.5  hours at -5

o

c/5 

minutes

Cold time OFF

17

18

Diesel Mode

Disable

Enable (20 seconds)

Delay between Ignition 

power up and Starter (crank).

Enable (10 seconds)

Delay between Ignition 

power up and Starter 

(crank).

Enable

No delay between 

Ignition power up and 

Starter (crank).

19

Turbo timer

Disable

Run 2 minutes.

Run 4 minutes.

20

Engine supervision:

 -Tachless -

-analog tach-

-Tach Data-Link-

Tachless on crank

and supervision Tach 

Data-Link.

     Tachless only. 

(

vehicles with automatic 

transmission only)

Start (crank) 8 seconds 

      on Tachless.

(

 vehicles with 

automatic transmission 

only)

Start (Crank) 8 sec 

+ Supervision by 

Data-LInk Tach

Tach  Data-Link  

only

Disarm 

the sys-

tem (the 

antenna 

led must 

not fl ash, 

see enter/

exit valet 

mode 

p.4).

STEP 

1

STEP 

2

STEP 

3

STEP 

4

STEP 

5

STEP 

6

X1

          

            

MODE 1 - LOCK
MODE 2 - UNLOCK
MODE 3 - TRUNK
MODE 4 - START
MODE 5 - LOCK 

+

 UNLOCK

MODE 6 - TRUNK 

+

 START

Turn the 

Ignition ON.

Press 

and hold 

the valet 

switch until 

the Parking 

lights turn 

ON,  the 

horn/siren 

will chirp.

Press and release the valet 

switch X times for the desired 

function. The Parking lights 

will fl ash and the horn/

siren will chirp each time to 

confi rm.

Press and 

release the 

brake-pedal 

once.

 

 

Turn the 

Ignition 

OFF to exit 

program-

ming.

The Parking 

lights will 

fl ash 4 

times.

Press the BUTTON on a programmed remote to select the mode (X). 

The Parking lights will fl ash 1-6 times to confi rm.

   Return to step 3 to programmed the next option

FUNCTION PROGRAMMING

Summary of Contents for EVO-ONE FTX25









Reviews: