FUNCTION
MODE 1
MODE 2
MODE 3
MODE 4
MODE 5
MODE 6
31
Special application
Programmable output (+)
No special application
Priority on function 2
Special application - Function 2 (all option)
not available.
White
(+) Parking
Lights
White
(+) Parking
Lights
White:(+) Parking-
Lights
Orange
(+) Accessory
Orange
Ign.2
Orange:(+) Parking
lights
White wire (E1) : Enable at
ground out, disable with vehicle
ignition OFF.
White wire (E1) : Trunk
Output
Pink
(+) Ignition
Pink
Ign.1
Pink:(+) Ignition
Yellow
(+) Start
Yellow
(+) Start
Yellow:(+) Start
32
Ground Out
Dk.Blue (Ground out):
Shut-down 1 second after
remote start run time.
Dk.Blue (Ground out):
Shut-down 3 seconds after
remote start run time.
Dk.Blue
(Ground Out):
Shutdown After
D.k Blue
(Ground Out):
Starter-Kill
D.k Blue
(Ground Out):
Arm / Rearm
Controlled by CAN
learning
33
Manual transmission
function
Manual transmission
completed by door closed.
Automatically activated by hand-
brake and Foot Brake
Manual sequence completed
by locking the doors
Cancel ready mode when
trunk open.
—
—
34
Trunk output
Pulse 0.5 seconds
Pulse 2.5 seconds
Unlock before trunk pulse
0.5sec
Trunk Output at ignition only
—
—
35
Door unlock Special
application
No special application
Activate vehicle ignition at
unlock.
Activate vehicle ignition and
accessory at unlock.
—
—
—
36
Activation/desactivation
remote Valet Mode
—
by remote :
TRUNK --> LOCK + UNLOCK or
valet button
By Valet button only
—
—
—
37
Security Remote car
starter
Special application
No special application
Security ON: Shutdown Engine
if the door is opened before
UNLOCK is pressed. (Door
trigger required).
—
—
—
—
38
System control by OEM
Remote
Disable
Press 3x Lock to remote start
Start/Stop on trigger shock
sensor
Alarm control by OEM
Remote.
Press Lock, Unlock
Lock to remote start
—
39
Temperature option
Disable
Enable : AUX1 activated at
5
o
c when remote started (see
function 25)
—
—
—
—
LEGEND: FUNCTION BY DEFAULT
MANUAL TRANSMISSION SEQUENCE
FOR COMPATIBLE VEHICLES ONLY
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
&
Make sure that
all doors are
closed and the
transmission is
in the NEUTRAL
position.
Push the
START
button
(3sec.). The
Parking lights
will flash once
and then
remain on.
Remove the
key from the
ignition barrel.
The vehicle
will remain
running with
the Remote-
Starter.
Exit the vehicle
and close all of the
doors.The Remote-
Starter will stop
running once all the
doors are closed.
Release
the brake
pedal
While the engine
is running.
Engage the
parking brake.
Release
the brake
pedal
WILL DISABLE MANUAL TRANSMISSION SEQUENCE
STANDARD
• Open any door(s)
• Open the hood
• Disengage the parking brake
Note :
If the Parking lights flash 3 times when Remote-
Starting, Ready Mode is not enabled.
PAGE 5
