PAGE 2
PROGRAMMING REMOTE TRANSMITTER(S)
The system can learn up to a maximum of 4 transmitters.
Any transmitters can be stored in more than 1 memory slot.
When a 5th transmitter is learned the 1st remote is erased (FIFO).
*Valet switch sold separately
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
WITH IGNITION SWITCH
Turn the Ignition
OFF.
Turn the
Ignition ON.
The LED
will turn
ON.
x4
Press and
release
the brake
pedal four
times.
Turn
the
Igni-
tion
ON.
WITH V
ALET SWITCH*
Press and hold the
valet switch* until
the parking lights
turn ON, the horn/
siren will chirp.
x5
Press and release the valet
switch* five time.
The parking lights will flash
and the horn/siren will chirp
each time to confirm.
x1
Press and
release
the brake
pedal
once.
The
LED
will
flash
rapidly.
On each Transmitter press
and release the
button
then press and release the
button.
The LED will stop
flashing for a
second confirming
programming.
Turn the
Ignition
OFF to exit
program-
ming.
ERASES ALL REMOTES THAT HAVE BEEN PROGRAMMED AND RESETS ALL FUNCTIONS BACK TO DEFAULT.
Disarm
the system
(The
antenna
led must
not be
flashing,
see enter/
exit valet
mode
p.6).
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Turn
the
Ignition
ON.
OR
Press and
hold the valet
switch* or
the antenna
button until
the Parking
lights turn
ON, the horn/
siren will
chirp.
OR
Press
and
release
the valet
switch*
or the
antenna
button
23
TIMES
.
X1
Press
and re-
lease the
brake
pedal
once.
OR
Press
and hold
the valet
switch* or
the antenna
button for
5 seconds
.
The Parking
lights will
flash to
confirm.
Turn the
Ignition
OFF to
exit pro-
gram-
ming.
The
Parking
lights
will
flash 4
times.
Within 5 sec
.
