- 151 -
no congestion-notify outer { CFI | Dot1p | TPID| vlan}
<-1-1> -
This command sets value of CNM's outer VLAN tag's CFI bits.
<-1-7> -
This command sets value of CNM's outer VLAN tag's 802.1p bits.
<0-65535> -
This command sets value of CNM's outer VLAN tag's TPID.
<0-4095> -
This command sets the CNM's outer VLAN ID.
no -
This command restored default value.
Default Setting
Command Mode
Global Config
7.2.18.9 congestion-notify inner
This command set value of CNM's inner VLAN tag's CFI bits and value of CNM's inner VLAN tag's
802.1p bits.
Syntax
congestion-notify inner { CFI <-1-1> | Dot1p <-1-7>}
no congestion-notify inner { CFI | Dot1p}
<-1-1> -
This command sets value of CNM's inner VLAN tag's CFI bits.
<-1-7> -
This command sets value of CNM's inner VLAN tag's 802.1p bits.
no -
This command restored default value..
Default Setting
Command Mode
Global Config
7.2.18.10 congestion-notify no-generate
The user can go to the CLI Global Configuration Mode to choose the CNM generation behavior when
congestion notification threshold is reached but the incoming sampled packet does not have CN-TAG.
Use the ‘congestion-notify no-generate’ global configuration command. Use the ‘no congestion-notify
no-generate’ to keep generate CNM.
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...
