- 253 -
7.8.3.5 dot1x user
This command adds the specified user to the list of users with access to the specified port or all ports.
The <username> parameter must be a configured user.
Syntax
dot1x user <user> {<slot/port> | all}
no dot1x user <user> {<slot/port> | all}
<user> -
Is the login user name.
<slot/port> -
Is the desired interface number.
all -
All interfaces.
no -
This command removes the user from the list of users with access to the specified port or all
ports.
Default Setting
None
Command Mode
Global Config
7.8.3.6 dot1x port-control
This command sets the authentication mode to be used on all ports. The control mode may be one of the
following.
force-unauthorized:
The authenticator PAE unconditionally sets the controlled port to unauthorized.
force-authorized:
The authenticator PAE unconditionally sets the controlled port to authorized.
auto:
The authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator, and the authentication server.
mac-based:
The authenticator PAE sets the controlled port mode to reflect the outcome of the
authentication exchanges between the supplicant, authenticator, and the authentication server on a per
supplicant basis.
Syntax
dot1x port-control all {auto | force-authorized | force-unauthorized | mac-based}
no dot1x port-control all
all -
All interfaces.
no -
This command sets the authentication mode to be used on all ports to 'auto'.
Default Setting
auto
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...
