- 445 -
Display Messages
Area ID:
A 32-bit identifier for the created stub area.
Type of Service:
The type of service associated with the stub metric. only supports Normal TOS.
Metric Val:
The metric value is applied based on the TOS. It defaults to the least metric of the type of
service among the interfaces to other areas. The OSPF cost for a route is a function of the metric
value.
Import Summary LSA:
Controls the import of summary LSAs into stub areas.
8.3.1.14 show ip ospf virtual-link
This command displays the OSPF Virtual Interface information for a specific area and neighbor. The
<areaid> parameter identifies the area and the <neighbor> parameter identifies the neighbor's Router
ID.
Syntax
show ip ospf virtual-link <areaid> <neighbor>
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
Area ID:
The area id of the requested OSPF area.
Neighbor Router ID:
The input neighbor Router ID.
Hello Interval:
The configured hello interval for the OSPF virtual interface.
Dead Interval:
The configured dead interval for the OSPF virtual interface.
Iftransit Delay Interval:
The configured transit delay for the OSPF virtual interface.
Retransmit Interval:
The configured retransmit interval for the OSPF virtual interface.
Authentication Type:
The configured authentication type of the OSPF virtual interface.
State:
The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router,
and backup designated router. This is the state of the OSPF interface.
Neighbor State:
The neighbor state.
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...
