- 586 -
Syntax
area <areaid> nssa no-summary
no area <areaid> nssa no-summary
<areaid>
- Area ID.
no
- This command disables nssa from the summary LSAs.
Default Setting
None
Command Mode
Router OSPFv3 Config
10.4.2.17 area nssa translator-role
This command configures the translator role of the NSSA. A value of always causes the router to
assume the role of the translator the instant it becomes a border router and a value of candidate causes
the router to participate in the translator election process when it attains border router status.
Syntax
area <areaid> nssa translator-role {always | candidate}
no area <areaid> nssa translator-role
<areaid>
- Area ID.
always
- A value of
always
will cause the router to assume the role of the translator when it becomes
a border router.
candidate
- a value of
candidate
will cause the router to participate in the translator election process
when it attains border router status.
no
- This command disables the nssa translator role from the specified area id.
Default Setting
None
Command Mode
Router OSPFv3 Config
10.4.2.18 area nssa translator-stab-intv
This command configures the translator stability interval of the NSSA. The <stabilityinterval> is the
period of time that an elected translator continues to perform its duties after it determines that its
translator status has been deposed by another router.
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...
