- 708 -
VLAN ID and Name
- You can use this screen to reconfigure an existing VLAN, or to create a new
one. Use this pull down menu to select one of the existing VLANs, or select 'Create' to add a new
one.
Participation
- Use this field to specify whether a port will participate in this VLAN. The factory
default is 'Autodetect'. The possible values are:
•
Include - This port is always a member of this VLAN. This is equivalent to registration fixed in
the IEEE 802.1Q standard.
•
Exclude - This port is never a member of this VLAN. This is equivalent to registration
forbidden in the IEEE 802.1Q standard.
•
Autodetect - Specifies that port may be dynamically registered in this VLAN via GVRP. The
port will not participate in this VLAN unless it receives a GVRP request. This is equivalent to
registration normal in the IEEE 802.1Q standard.
Tagging
- Select the tagging behavior for this port in this VLAN. The factory default is 'Untagged'.
The possible values are:
•
Tagged - all frames transmitted for this VLAN will be tagged.
•
Untagged - all frames transmitted for this VLAN will be untagged.
Configurable Data
VLAN ID
- Specify the VLAN Identifier for the new VLAN. (You can only enter data in this field when
you are creating a new VLAN.) The range of the VLAN ID is (1 to 3965).
VLAN Name
- Use this optional field to specify a name for the VLAN. It can be up to 32
alphanumeric characters, including blanks. The default is blank. VLAN ID 1 always has a name of
'Default'.
VLAN Type
- This field identifies the type of the VLAN you are configuring. You cannot change the
type of the default VLAN (VLAN ID = 1): it is always type 'Default'. When you create a VLAN, using
this screen, its type will always be 'Static'. A VLAN that is created by GVRP registration initially has a
type of 'Dynamic'. You may use this pull down menu to change its type to 'Static'.
Non-Configurable Data
Slot/Port
- Indicates which port is associated with the fields on this line.
Status
- Indicates the current value of the participation parameter for the port.
Command Buttons
Submit
- Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
Delete
- Delete this VLAN. You are not allowed to delete the default VLAN.
11.3.5.2 Viewing Port-based VLAN Information Page
This page displays the status of all currently configured VLANs.
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...
