Cable Management Arm Installation
Rack Installation Instructions
FortiAnalyzer-2000B Version 4.0 MR1 Rack and Hardware Install Guide
14
Revision 1
http://docs.fortinet.com/
•
Feedback
Figure 8: Cable Management Arm kit contents
2
To install or remove the Cable Management Arm Tray, do the following:
• Align and engage each side of the tray with the receiver brackets on the inner
edges of the rails and push forward until the tray clicks into place (4).
1
2
3
Note:
To secure the CMA for shipment in the rack, loop the tie wraps around both baskets
and tray and cinch them firmly. For larger CMAs, the tie wraps can be threaded through the
inner and outer baskets and around the tray to secure them. Securing the CMA in this
manner will also secure your system in unstable environments.
Note:
The CMA tray provides support and acts as a retainer for the CMA.
